Juda kiln -300T/D production line -EPC project

Short Description:


Product Detail

Video

Product Tags

Technological process:

Batcher system: the stone and coal are respectively transported to the stone and coal cache buckets with belts;The weighing stone is then fed into the mixing belt through the feeder.The weighed coal goes into the mixing belt through the flat belt feeder.

Feeding system: stone and coal stored in the mixed belt are transported to the hopper, which is operated by the winder to make the hopper circulate up and down for feeding, which improves the transport volume and achieves high efficiency and energy saving.

Distributing system: the mixture of stone and coal is fed into the buffer hopper through the feeder and into the rotary feeder. The mixture is uniformly fed into the upper part of the kiln through the multi-point rotary feeder.

Lime  discharging system: after the calcined lime stone is cooled, the finished lime is discharged to the lime discharging belt by the four-sides unloading machine and two sections of air lock valve. In case of off-firing, the direction and amount of lime discharging can be adjusted to achieve off-firing and core-pulling.

Dust removal system: after the induced draft fan, the dust containing smoke and gas first through the cyclone dust collector to remove large particles of dust;Then into the bag filter to remove small particles of dust;After entering the water film precipitator, the flue gas will rub against the water film all the time, and the dusty fume will be wetted. It will enter the bottom of the dust precipitator with the water flow and be discharged into the sedimentation tank. After precipitation, the clean water will be recycled.

Electric control system: adopting German Siemens computer control system, fully automatic production line,  cost-saving, stable product quality.




  • Previous:
  • Next:

  • Leave Your Message

    Write your message here and send it to us

    Related products

    • Lime Kiln Production Line Assembly

      Lime Kiln Production Line Assembly

      Overview Composition of production process (1) Batching weighing system (2) Lifting and feeding system (3) lime kiln feeding system (4) Kiln body  calcining system (5) Lime discharging system (6) Lime storage system (7) Electrical control system (8) Environmental protection equipment system Process Flow The kiln is equipped with both gas burning and coal burning. It can use natural gas and gas as fuel or coal as fuel.When burning gas, take industrial natural gas as an example.At...

    • Automatic control assembly

      Automatic control assembly

      Automatic control system From electronic batching, lifting, automatic distributing, temperature control, air pressure, calcining, lime discharging, shipping, all adopted computer control system, combined with human-machine interface control system and ordinary computer control system.Achieved the man-machine interface and site synchronous operation, than the old lime kiln to save more than 50% of the labor, greatly improve the production efficiency, reduce the labor intensity, improve the wor...

    • Juda kiln -200T/D 3 production lines -EPC project

      Juda kiln -200T/D 3 production lines -EPC project

      Budget quotation (single kiln)   Name Detail Quantity Unit Price/$ Total/$ Foundation rebar 13 T 680 8840 concrete 450 cubic 70 31500 Total       40340 steel structure Steel plate 140 T 685 95900 proximate matter 33 T 685 22605 tube 29 T 685 19865 Total       138370 Kiln body insulation material firebrick(LZ-55,345mm) 500 T 380 190000 fireclay 50 T 120 6000 Aluminum silicate f...

    • Juda Kiln-Cross section of bottom of kiln

      Juda Kiln-Cross section of bottom of kiln

      Superior performance of equipment (1) High daily production (up to 300 tons per day); (2) High product activity (up to 260~320 ml); (3) Low burn rate (≤10 per cent;) (4) Stable calcium oxide content (CaO≥90 per cent); (5) Easy operation and control in the kiln (no pumping, no deviation, no cascade, no furnace, balanced settlement of coal in the furnace); (6) Reduction in the amount of lime consumed by the product after use by the enterprise (30 per cent for steelmaking, desulphurization and s...

    • Furnace Grill Of The Kiln Body

      Furnace Grill Of The Kiln Body

      8. furnace mountain system The finished lime passes through the furnace frame under the action of gravity, the small particles fall directly on the dust hopper, the large particles stay outside the furnace mountain, protect the combustion pipeline, ensure the oxygen supply, can automatically control the discharge speed of the finished product in the furnace, and is of great help to the smooth surface, high yield and fuel combustion. If the size of limestone is uneven, the difference is too la...

    • Combustion Fan

      Combustion Fan

      11. Air supply system  Nowadays, most lime kilns only supply air at the bottom, which is not evenly distributed, and is prone to the phenomena of partial burning, core extraction, coking and edge refining. The high pressure wind produced by our special combustion fan rises to the calcining zone through the cooling zone at the bottom of the kiln. The cooling zone is actually a heat exchange zone. The temperature of lime drops sharply when the natural temperature rises with high temperature lim...

    Leave Your Message

    Write your message here and send it to us